Publicações 2016-2013

2016

Guedes, L.F.N., Dalboni Garcia, M.T., Cunha, J.N., Duarte, L. T., Bertagnolli, D., Silva, L., Huguenin, J.A.O., Ferreira, E.A., J Solid State Electrochem (2016) 20: 2517. https://doi.org/10.1007/s10008-016-3140-8

Silva, LM., Nascimento, M., Oliveira, E.M., Mota, I. O., Castro, J.A., Estudo cinético da rota combinada aquecimento por energia de micro-ondas e lixiviação para remoção do fósforo em minérios de ferro, Tecnologia em Metalurgia, Materiais e Mineração, v. 13, p. 1-8, 2016, http://dx.doi.org/10.4322/2176-1523.0927

Zöllner, D., Streitenberger, P., Rios, P.R., Shedding some light on the early grain growth regime: About the effect of the initial microstructure on normal grain growth, Computational Materials Science, Volume 113, 2016, Pages 11-20, http://doi.org/10.1016/j.commatsci.2015.11.022

Rios, P., Guimarães, J.R.C., Athermal Martensite Transformation Curve, Materials Research, Volume 19, 2016, Pages 490-495, http://dx.doi.org/10.1590/1980-5373-MR-2015-0690

Xavier, C.R., Delgado Junior, H.G, Castro, J.A., Ferreira, A.F., Numerical Predictions for the Thermal History, Microstructure and Hardness Distributions at the HAZ during Welding of Low Alloy Steels. Materials Research, 19(3), 520-533, 2016. https://dx.doi.org/10.1590/1980-5373-MR-2015-0068

Almeida, D.S.S., Queiroz, A.V., Xavier, C.R., Marcelo, C.J., Castro, J.A., Oliveira, E.M., Modelo duplo-elipsóide acoplado a volumes finitos para simular a soldagem GMAW do aço inoxidável duplex SAF 2205, Tecnologia em Metalurgia, Materiais e Mineração, v. 13, p. 148-156, 2016, http://dx.doi.org/10.4322/2176-1523.0936

Costa, T., B., Nogueira, T.M.C., Silva, L., Ellipsometric measurement of thickness of tin oxides grown by voltammetry in phosphate solution of pH 8.7, Journal of electroanalytical science and engineering, V. 6, p. 303-314, 2016, http://dx.doi.org/10.5599/jese.326

Jácome, P. A.D., Fernandes, M. T., Garcia, G. Ferreira, A.F., Castro, J.A., Ferreira, I.L., Application of computational thermodynamics to the evolution of surface tension and Gibbs-Thomson coefficient during multicomponent aluminum alloy solidification, Materials Science Forum, Volume 869, 2016, Pages 416-422, http://dx.doi.org/10.4028/www.scientific.net/MSF.869.41

Pereira, A.M., Cardoso, M.C., Moreira, L.P., Effects of strain-rate and deformation mode on strain-induced martensite transformation of AISI 304L steel sheet, Applied Mechanics and Materials, Volume 835, 2016 Pages 216-221, http://dx.doi.org/10.4028/www.scientific.net/AMM.835.216

Costa, D.T. Cardoso, M.C., Fonseca, G.S., Moreira, L.P., Martiny, M., Mercier, S., Strain-induced martensite formation of AISI 304L steel sheet: experiments and modeling, Materials Science Forum, Volume 869, 2016 Pages 490-496, http://dx.doi.org/10.4028/www.scientific.net/MSF.869.490

Bressan, J.D., Moreira, L.P., Freitas, M.C.S., Bruschi, S., Ghiotti, A. , Michieletto, F., Modelling of forming limit Sstrains of AA5083 aluminium sheets at room and high temperatures, Advanced Materials Research, Volume 1135, 2016, Pages 202-217, http://dx.doi.org/10.4028/www.scientific.net/AMR.1135.202

Cardoso, M.C., Pereira, A.M., Silva, F.R.F., Moreira, L.P., Experimental analysis of forming limits and thickness strains of DP600-800 steels, Applied Mechanics and Materials, Volume 835, 2016, Pages 230-235, http://dx.doi.org/10.4028/www.scientific.net/AMM.835.230

Cardoso, M.C., Moreira, L.P., Freitas, M.C.S., Elasto-Plastic modeling of the limit strains in metallic sheets, Materials Science Forum, Volume 869, 2016, Pages 532-537, http://dx.doi.org/10.4028/www.scientific.net/MSF.869.532

Msolli, S., Martiny, M., Cardoso, M.C., Moreira, L.P., Mercier, S., Molinari, A., Numerical modeling of the deformation of AISI 304L using a tangent additive Mori-Tanaka homogenization scheme: Application to sheet metal forming, Journal of Materials Processing Technology, Volume 235, 2016, Pages 187-205, http://doi.org/10.1016/j.jmatprotec.2016.04.027

Périgo, E.A, Titov, I., Weber, R., Honecker, D., Gilbert, E.P., De Campos, M.F., Michels, A., Small-angle neutron scattering study of coercivity enhancement in grain-boundary-diffused NdFeB sintered magnets, Journal of Alloys and Compounds, Volume 677, 2016, Pages 139-142, https://doi.org/10.1016/j.jallcom.2016.03.160.

Correa, S.R, Campos, M.F., Marcelo, C.J., Castro, J.A., Fonseca, M.C., Chuvas, T. C., Padovese, L.R., Characterization of residual stresses and microstructural by technique of magnetic Barkhausen noise of API 5L X80 steel heat treatment, Materials Science Forum, Volume 869, 2016, Pages 556-561,  http://dx.doi.org/10.4028/www.scientific.net/MSF.869.556

Carvalho, S. A., De Leo, S., Huguenin, J. A. O., Silva, L., Experimental confirmation of the transversal symmetry breaking in laser profiles, Journal of Modern Optics, v. 64, p. 280-287, 2016, https://doi.org/10.1080/09500340.2016.1229511

Correa, S.R, Campos, M.F., Marcelo, C.J., Castro, J.A., Fonseca, M.C., Chuvas, T. C., Padovese, L.R., Evaluation of residual stresses in welded ASTM A36 structural steel by metal active gas (MAG) welding process, Materials Science Forum, Volume 869, 2016, Pages 564-571, http://dx.doi.org/10.4028/www.scientific.net/MSF.869.567

Travaglia, C.A.P., Lopes, L.C.R., Analytical model for prediction of friction materials durability based on the braking energy dissipation, SAE Tecnhical Paper, 2016, http://dx.doi.org/10.4271/2016-36-0400

2015

Guimarães, J.R.C., Rios, P.R., The mechanical-induced martensite transformation in Fe-Ni-C alloys. Acta Materialia, v. 84, p. 436-442, 2015, http://dx.doi.org/10.1016/j.actamat.2014.10.040

Rios, P.R., Glicksman, M.E., Grain boundary, triple junction and quadruple point mobility controlled normal grain growth. Philosophical Magazine, v. 95, p. 2092-2127, 2015, http://dx.doi.org/10.1080/14786435.2015.1050476

Guimarães, J.R.C., Rios, P.R., Microstructural Path Analysis of Martensite Dimensions in FeNiC and FeC Alloys. Materials Research, v. 18, p. 595-601, 2015, http://dx.doi.org/10.1590/1516-1439.000215

Chwastek, K. R., Baghel, A. P. S., Campos, M. F., Kulkarni, S. V., Szczygłowski, J., A Description for the Anisotropy of Magnetic Properties of Grain-oriented Steels. IEEE Transactions on Magnetics, v. 51, p. 1-1, 2015, http://dx.doi.org/10.1109/tmag.2015.2449775

Campos, M.F., Silva, F. A., Application of Micromagnetic Models for Barium Ferrite Magnets. Materials Science Forum, v. 820, p. 199-204, 2015, http://dx.doi.org/10.4028/www.scientific.net/MSF.820.199

Silva, R. A., Souza, L.F. G., Morales, E. V., Rios, P.R., Bott, I. S., Formation of Microphases and Constituents from Remaining Austenite Decomposition in API X80 Steel Under Different Processing Conditions. Materials Research, v. 18, p. 908-917, 2015, http://dx.doi.org/10.1590/1516-1439.315214

Ferreira, J.L., Tepedino, J.O. A., Wolff, M. A., Moreira, L.P., Strain-Path effects on the formability behavior of interstitial-free steel, Key Engineering Materials, v. 651-653, p. 126-131, 2015, http://dx.doi.org/10.4028/www.scientific.net/KEM.651-653.126

Ferreira, A.F., Ferreira, I.L., Cunha, J.P., Salvino, I. M., Simulation of the microstructural evolution of pure material and alloys in an undercooled melts via phase-field method and adaptive computational domain, Materials Research, v. 06, p. 907-923, 2015, http://dx.doi.org/10.1590/1516-1439.293514

Soares, H.C., Meireles, J.B., Castro, A.O., Huguenin, J.A.O., Schmidt, A.G.M., Silva, L., Tsallis threshold analysis of digital speckle patterns generated by rough surfaces, Physica A: Statistical Mechanics and its Applications, Volume 432, 2015, Pages 1-8, https://doi.org/10.1016/j.physa.2015.02.100

Guimarães, B. H.D., Xavier, C.R., Marcelo, C.J., Castro, J.A., Avaliação da precipitação da fase sigma na soldagem de aços inoxidáveis duplex. Revista Brasileira de Aplicações do Vácuo, v. 34, p. 1, 2015, http://dx.doi.org/10.17563/rbav.v34i1.937

Melo-Silva, T.C.F., Melo-Silva, C.L., Carvalho, C.F., Teixeira, A.B., Lins, J.F.C., Gouvêa, J.P., Evaluation of Mechanical Properties of Composite Materials Used in Dentistry Varying the Inorganic Composition. Materials Science Forum, v. 820, p. 320-324, 2015, http://dx.doi.org/10.4028/www.scientific.net/msf.820.320

Ferreira, A.F., Melo, E.G., Ferreira, L.O., Prediction of Secondary-Dendrite Arm Spacing for Binary Alloys by Means of a Phase-Field Model. Steel Research International, V. 86, 1, 2015, Pages 58-64, http://dx.doi.org/10.1002/srin.201300423

Melo-Silva, C.L., Melo-Silva, T.C.F., Carvalho, C.F., Sudré, J.P.S., Freitas, R.X. Gouvêa, J.P., Lins, J.F.C., Evaluation of Morphology and Roughness of the Surface of a Ceramic Based on Lithium Disilicate, after Conditioning with Acid Hydrofluoric the 5% and 10%. Materials Science Forum, v. 820, p. 315-319, 2015, http://dx.doi.org/10.4028/www.scientific.net/msf.820.315

Nascimento, F. C., Paresque, M. C.C., Castro, J.A., Jácome, P.A.D., Garcia, A., Ferreira, I.L., Application of computational thermodynamics to the determination of thermophysical properties as a function of temperature for multicomponent Al-based alloys. Thermochimica Acta, v. 619, p. 1-7, 2015, http://dx.doi.org/10.1016/j.tca.2015.09.013

Silva, L.M., Nascimento, M., Gutiérrez, M.M., Torem, M., L., Castro, J.A., Avaliação da rota de redução do teor do elemento fósforo contido no minério de ferro através da técnica de aquecimento por energia de micro-ondas seguida de lixiviação ácida. Ciência e Tecnologia dos Materiais, v. 27, p. 63-72, 2015, http://dx.doi.org/10.1016/j.ctmat.2015.07.001

Demarque, R., Castro, J.A., Xavier, C.R., Almeida, D.S.S., Marcelo, C.J., Santos, E.P., Queiroz, A. V., Estudo Numérico e Experimental da Evolução Microestrutural e das Propriedades de Juntas Soldadas de Vergalhões pelo Processo GMAW. Revista Soldagem e Inspeção, v. 20, p. 434-445, 2015, http://dx.doi.org/10.1590/0104-9224/SI2004.10

Silva, F. A., Rojas, E.E.G., Campos, M.F., Particle Size Analysis of Fe3O4 Nanoparticles Coated by Polyethyleneglycol. Materials Science Forum, v. 820, p. 373-377, 2015, http://dx.doi.org/10.4028/www.scientific.net/MSF.820.373

Xavier, C.R., Delgado Júnior, H.G., Castro, J.A., An Experimental and Numerical Approach for the Welding Effects on the Duplex Stainless Steel Microstructure. Materials Research, v. 18, p. 489-502, 2015, http://dx.doi.org/10.1590/1516-1439.302014

2014

Mota, I.O., Castro, J.A., Casqueira, R.G., Oliveira Júnior, A.G., Study of electroflotation method for treatment of wastewater from washing soil contaminated by heavy metals. Journal of Materials Research and Technology, v. 4, p. 109-113, 2014, http://dx.doi.org/10.1016/j.jmrt.2014.11.004

Campos, M.F., Romero, S.A., Aparecida, F.A.S., Castro, J.A., Hysteresis Modeling of Nanocrystalline NdFeB Magnets. Journal of Superconductivity and Novel Magnetism, v. 28, p. 847-859, 2014, http://dx.doi.org/10.1007/s10948-014-2729-3

Zöllner, D., Rios, P.R., Investigating the von Neumann-Mullins relation under triple junction dragging. Acta Materialia, v. 70, p. 290-297, 2014, http://dx.doi.org/10.1016/j.actamat.2014.02.039

Silva, A. J.S.T., Goldstein, H., Guesser, W.L., Campos, M.F., Quenching and partitioning heat treatment in ductile cast irons. Materials Research, v. 17, p. 1115-1123, 2014, http://dx.doi.org/10.1590/1516-1439.220713

Guimarães, J.R.C., Rios, P.R., Martensite transformation in bulk and polycrystalline austenite. Journal of Materials Science, v. 49, p. 3816-3822, 2014, http://dx.doi.org/10.1007/s10853-014-8093-7

Fredericci, C., Campos, M.F., Braga, A.P.V., Nazarre, R.V., Landgraf, F.J.G., Périgo, E.A., Nd-enriched particles prepared from NdFeB magnets: A potential separation route. Journal of Alloys and Compounds, v. 615, p. 410-414, 2014, http://dx.doi.org/10.1016/j.jallcom.2014.06.203

Guimarães, B.H. D., Xavier, C.R., Castro, J.A., Campos, M.F., Marcelo, C.J., Efeito da energia de soldagem e da espessura do aço inoxidável duplex sobre as transformações na zona afetada pelo calor. Revista Brasileira de Aplicações de Vácuo, v. 33, p. 1-4, 2014, http://dx.doi.org/10.17563/rbav.v33i1-2.938

Mota, I.O., Silva, L.M., Castro, J.A., Predictions of Xylene Adsorption on Agglomerated Activated Carbon Pellets in a Fixed Bed Column. Materials Science Forum, v. 802, p. 636-641, 2014, http://dx.doi.org/10.4028/www.scientific.net/msf.802.636

Campos, M.F., Romero, S.A., Silva, F.A.P., Castro, J.A., Hysteresis Modeling of Nanocrystalline NdFeB Magnets. Journal of Superconductivity and Novel Magnetism, v. 28, p. 847-850, 2014, http://dx.doi.org/10.1007/s10948-014-2729-3

Antonio, P. P.C., Campos, M.F., Gerhardt, G. J.L., Missel, F.P., Sharp Increase of Hysteresis Area Due to Small Plastic Deformation Studied With Magnetic Barkhausen Noise. IEEE Transactions on Magnetics, v. 50, p. 1-4, 2014, http://dx.doi.org/10.1109/TMAG.2013.2288324

Souza, C.J.F., Ramos, A.V., Câmara, P.B.S., Gulão, E.S., Campos, M.F., Garcia-Rojas, E.E., Polymeric complexes obtained from the interaction of bovine serum albumin and κ-carrageenan. Food Hydrocolloids, v. 45, p. 286-290, 2014, http://dx.doi.org/10.1016/j.foodhyd.2014.10.023

Castro, J.A., Campos, M.F., Influence of the Grain Size on the Dysprosium Diffusion in NdFeB Magnets. Materials Science Forum, v. 802, p. 546-551, 2014, http://dx.doi.org/10.4028/www.scientific.net/msf.802.546

Rocha, E.P., Castro, J.A., Characterization and three-dimensional reconstruction of pores of self-reducing pellets done by EAF dust. Materials Research, v. 17, p. 47-55, 2014, http://dx.doi.org/10.1590/S1516-14392013005000139

Rios, P.R., Drumond, G.S., Neves, T., Guimarães, J.R.C., Martensite Spread: Analytical Modeling and Computer Simulation. Materials Science Forum, v. 783-786, p. 2182-2187, 2014, http://dx.doi.org/10.4028/www.scientific.net/MSF.783-786.2182

Lacerda, C.V., Ritter, E., Pires, J.A.C., Castro, J.A., Migration of inorganic ions from the leachate of the Rio das Ostras landfill: A comparison of three different configurations of protective barriers. Waste Management, v. 34, p. 2285-2291, 2014, http://dx.doi.org/10.1016/j.wasman.2014.06.012

Silva, F.A.S., Rojas, E.E.G., Rodrigues, G.F., Silva, B.F.A., Campos, M.F., Synthesis and Characterization of Biocompatible Fe3O4 for Use in Cell Hyperthermia. Materials Science Forum, v. 775-776, p. 476-481, 2014, http://dx.doi.org/10.4028/www.scientific.net/MSF.775-776.476

Souza, D.S., Assis, W. L. S., Rios, P.R., Stereological analysis of the microstructure of pure iron with random nucleation. Journal of Materials Research and Technology, v. 3, p. 349-353, 2014, http://dx.doi.org/10.1016/j.jmrt.2014.08.002

Ferreira, A.F., Temperature Prediction at the Blow End of the Converter via Control Model, Advanced Materials Research, v. 1025-1026, p. 298-301, 2014, http://dx.doi.org/10.4028/www.scientific.net/AMR.1025-1026.298

Ferreira, A.F., Castro, J.A., Phase Field Simulations of Dendritic Crystal Growth with Focus on the Computational Efficiency, Advanced Materials Research, v. 1025-1026, p. 745-748, 2014, http://dx.doi.org/10.4028/www.scientific.net/amr.1025-1026.745

Silva, L.M., Nascimento, M., Castro, J.A., Mota, I.O., Avaliação da utilização da energia de micro-ondas para processo de remoção do teor de fósforo contido no minério de ferro, Holos, v. 3, p. 245, 2014, http://dx.doi.org/10.4028/www.scientific.net/msf.802.367

Medeiros, N., Moreira, L.P., Upper-bound analysis of die corner gap formation for strain-hardening materials in ECAP process. Computational Materials Science, v. 91, p. 350-358, 2014, http://dx.doi.org/10.1016/j.commatsci.2014.05.012

Medeiros, N., Moreira, L.P., Non-isothermal analysis of die corner gap formation for materials deformed by multi-pass ECAP. IOP Conference Series: Materials Science and Engineering, v. 63, p. 0120351-01203510, 2014, http://dx.doi.org/10.1088/1757-899X/63/1/012035

Melo-Silva, C.L., Carvalho, C.F., Melo-Silva, T.C.F., Freitas, R.X., Silva, F.R.F. Lins, J.F.C., ,Analysis of the Y-TZP Ceramic Substucture in Blasting with Aluminum Oxide before and after Sintering. Materials Science Forum, v. 805, p. 576-580, 2014, http://dx.doi.org/10.4028/www.scientific.net/msf.805.576

Santos, C., Habibe, A.F., Rodrigues, D., Minatti, J.C., Lins, J.F.C., Microstructural Characterization of 66%Co-28%Cr-6%Mo Dental Alloy Powder Obtained by High-Energy Ball Milling. Materials Science Forum, v. 802, p. 51-55, 2014, http://dx.doi.org/10.4028/www.scientific.net/MSF.802.51

Oliveira, E. M., Valadão, I.C.R.P., Araújo, A. S.F., Castro, J.A., Application of Nanoparticle Tracking Analysis (NTA) in Aqueous Solutions of TiO2. Materials Science Forum, v. 802, p. 624-629, 2014, http://dx.doi.org/10.4028/www.scientific.net/MSF.802.624

Freitas, M.C.S., Castro, J.A., Moreira, L.P., Vitoretti, F.P., Densification Behaviour Modelling for Metallic Powders. Materials Science Forum, v. 802, p. 317-322, 2014, http://dx.doi.org/10.4028/www.scientific.net/msf.802.317

Castro, J.A., Ferreira, A.F., Campos, M.F., Ferreira, I.L., Modeling a Compact Sintering Process Based on Biomass Fuels. Advanced Materials Research, v. 902, p. 33-40, 2014, http://dx.doi.org/10.4028/www.scientific.net/AMR.902.33

2013

Castro, J.A., Nath, N., França, A.B., Guilherme, V. S., Sazaki, Y., Analysis by multiphase multicomponent model of iron ore sintering based on alternative steelworks gaseous fuels. Ironmaking & Steelmaking, v. 39, p. 605-613, 2013, http://dx.doi.org/10.1179/1743281212y.0000000008

Freitas, M.C.S., Moreira, L.P., Garcez, R. Experimental analysis and theoretical predictions of the limit strains of a hot-dip galvanized interstitial-free steel sheet. Materials Research, v. 16, p. 351-366, 2013, http://dx.doi.org/10.1590/S1516-14392013005000015

Nascimento, W.C., Cardoso, M.C., Moreira, L.P., Simulação numérica do primeiro passe de laminação a frio de uma tira de aço C-MN. Tecnologia em Metalurgia, Materiais e Mineração, v. 10, p. 35-42, 2013, http://dx.doi.org/10.4322/tmm.2013.005

Corrêa, R.D., Meireles, J. B., Huguenin, J.A.O., Caetano, D.P., Silva, L., Fractal structure of digital speckle patterns produced by rough surfaces. Physica. A, v. 392, p. 869-874, 2013, http://dx.doi.org/10.1016/j.physa.2012.10.023

Franco, F. A., González, M.F.R., Campos, M.F., Padovese, L.R., Relation Between Magnetic Barkhausen Noise and Hardness for Jominy Quench Tests in SAE 4140 and 6150 Steels. Journal of Nondestructive Evaluation, v. 32, p. 93-103, 2013, http://dx.doi.org/10.1007/s10921-012-0162-8

Rios, P.R., Villa, E., On the Generalisation of JMAK’s Theory. Materials Science Forum, v. 753, p. 137-142, 2013, http://dx.doi.org/10.4028/www.scientific.net/MSF.753.137

Oliveira, A.C.L., Rios, P.R., A novel iron enrichment isothermal kinetic model proposal for galvanneal coatings. Journal of Materials Research and Technology, v. 2, p. 117-124, 2013, http://dx.doi.org/10.1016/j.jmrt.2013.01.001

Périgo, E.A., Silva, F.A.S., Campos, M.F., On the specific absorption rate of hyperthermia fluids. Applied Physics Letters, v. 103, p. 264107, 2013, http://dx.doi.org/10.1063/1.4860966

Oliveira, S.C., Assis, W.L.S., Villa, E., Rios, P.R., Computer simulation of simultaneous evolution of individual texture components During recrystallization of an IF steel. Materials Research, v. 16, p. 1195-1202, 2013, http://dx.doi.org/10.1590/s1516-14392013005000111

Souza, C.J.F., Garcia-Rojas, E. E., Melo, N.R., Gaspar, A., Lins, J.F.C., Complex coacervates obtained from interaction egg yolk lipoprotein and polysaccharides. Food Hydrocolloids, v. 30, p. 375-381, 2013, http://dx.doi.org/10.1016/j.foodhyd.2012.06.012

Zilnyk, K.D., Leite, G.S., Sandim, H.R.Z., Rios, P.R., Grain growth inhibition by connected porosity in sintered niobium. Acta Materialia, v. 61, p. 5821-5828, 2013, http://dx.doi.org/10.1016/j.actamat.2013.06.027

Guimarães, J.R.C., Rios, P.R., Modeling Lath Martensite Transformation Curve. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 44, p. 2-4, 2013, http://dx.doi.org/10.1007/s11661-012-1490-0

Silva, F.A.S., Castro, N.A., Campos, M.F., Modeling hysteresis curves of anisotropic SmCoFeCuZr magnets. Journal of Magnetism and Magnetic Materials, v. 328, p. 53-57, 2013, http://dx.doi.org/10.1016/j.jmmm.2012.09.048

Guimarães, J.R.C., Rios, P.R., Microstructural Analysis of the Martensite Volume Fraction. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 44, p. 147-151, 2013, http://dx.doi.org/10.1007/s11661-012-1506-9

Romero, S.A., Campos, M.F., Castro, J.A., Moreira, A.J., Landgraf, F.J.G., Microstructural changes during the slow-cooling annealing of nanocrystalline SmCo 2:17 type magnets. Journal of Alloys and Compounds, v. 551, p. 312-317, 2013, http://dx.doi.org/10.1016/j.jallcom.2012.08.131

Xavier, C.R., Campos, M.F., Castro, J.A., Numerical method applied to duplex stainless steel welding. Ironmaking & Steelmaking, v. 40, p. 420-429, 2013, http://dx.doi.org/10.1179/1743281212Y.0000000065

Castro, J.A., França, A.B., Guilherme, V. S., Sazaki, Y., Estudo numérico da influência de propriedades de amolecimento e fusão na cinética de formação de (CaFe2O4-Ca2Fe2O5) na sinterização de minério de ferro, Tecnologia em Metalurgia, Materiais e Mineração, v. 10, p. 17-27, 2013, http://dx.doi.org/10.4322/tmm.2013.003

Campos, M.F., Silva, F.A.S., Périgo, E.A., Castro, J.A., Stoner-Wohlfarth model for the anisotropic case. Journal of Magnetism and Magnetic Materials, v. 345, p. 147-152, 2013, http://dx.doi.org/10.1016/j.jmmm.2013.06.028

Rocha, E.P., Guilherme, V. S., Castro, J.A., Sazaki, Y., Yagi, J., Analysis of synthetic natural gas injection into charcoal blast furnace. Journal of Materials Research and Technology, v. 2, p. 255-262, 2013, http://dx.doi.org/10.1016/j.jmrt.2013.02.015

Castro, J.A., Araújo, G. M., Mota, I.O., Sazaki, Y., Analysis of the combined injection of pulverized coal and charcoal into large blast furnaces. Journal of Materials Research and Technology, v. 2, p. 308-314, 2013, http://dx.doi.org/10.1016/j.jmrt.2013.06.003

Vitoretti, F.P., Castro, J.A., Study of the induration phenomena in single pellet to traveling grate furnace. Journal of Materials Research and Technology, v. 02, p. 315-322, 2013, http://dx.doi.org/10.1016/j.jmrt.2013.06.004

Castro, J.A., Pereira, J.L., Guilherme, V. S., Rocha, E.P., França, A.B., Model predictions of PCDD and PCDF emissions on the iron ore sintering process based on alternative gaseous fuels. Journal of Materials Research and Technology, v. 2, p. 323-331, 2013, http://dx.doi.org/10.1016/j.jmrt.2013.06.002

Lee, W-H, Park, J-O, Lee, J-S, Castro, J.A., Sazaki, Y., Solid state steelmaking by decarburisation of rapidly solidified high carbon iron sheet. Ironmaking & Steelmaking, v. 39, p. 530-534, 2013, http://dx.doi.org/10.1179/1743281212y.0000000032